Are you thinking of adding a stylish finish to your home or office flooring? A great way to do so is by installing wooden skirting boards. They not only add a unique touch to interiors but also protect walls from damages caused by furniture and household cleaning. Installing wooden skirting board is a seemingly simple task, but it can be complicated if you don’t understand some basics. Here’s a comprehensive guide to make the process easy for you.

Measurement

The first step to installing wooden skirting boards is to get measurements of the walls you need skirting boards installed. Take measurements of each area to be fitted with skirting boards and purchase appropriate length boards with a little extra just in case. Measure the length and width of each wall and add up the numbers to get an approximate measure. Add 10% extra in case of mistakes while cutting the boards.

Tools and Equipment

You will need some tools and equipment to install skirting boards. The standard tools you will need include an electric saw for cutting the skirting boards, measuring tape, spirit level for straight and level cuts, and more. Make sure you have all the necessary safety equipment to avoid injuries while handling the tools. Ensure that you use the right equipment to avoid ruining the boards.

Removing Old Skirting Boards

If you had old skirting boards installed, you will need to remove them before you can install new boards. Use a sharp craft knife to cut through the paint or wallpaper sealant. Pull out the skirting boards using a pry bar. Be careful not to damage the walls during the removal process, and ensure you use gloves to protect your hands. Once the old skirting board is removed, use sandpaper to prepare the wall for the new skirting board.

Installing the Skirting Board

The installation process starts by applying adhesive to the back of the skirting boards. Use a caulking gun to apply adhesive evenly to the back of the board. Ensure you apply enough adhesive sparingly along the board’s length and width. Place the skirting board next to the wall and press it firmly for a few seconds. Ensure that it is level and don’t worry about mistakes. Fill in any gaps with additional adhesive before securing the nails, and remember to use a spirit level for the straightness of the boards.

Finishing the Installation

The final step is to complete the installation by giving the skirting board a finishing touch. Fill any gaps between the top of the skirting board and the wall. Use painters’ filler or any other suitable gap filler. Sand the skirting board to get rid of sharp edges, rough finish, and extra adhesive before applying a primer. Finally, paint or stain for the desired finishing.

Conclusion:

Installing wooden skirting boards is an excellent way to add a unique touch of style and elegance to your home or office flooring. However, it may seem daunting if you have no knowledge or experience. With the help of this comprehensive article, you are confident that you can install wooden skirting boards quickly and easily. Remember to use the right tools, take accurate measurements, remove old skirting boards, install the new ones with adhesive and nails, and finish the installation by sanding and painting or staining. Your flooring will look magnificent after following these simple steps!